Hi,
As of now I am facing a new issue with Pattern generator and remote register tab.
Issue 1:
I am not able to view the pattern generator tab and its settings.
Issue 2:
1. I am not able to view/save remote registers value
2. Selected register is disappearing ,once I select any register in remote registers tab and traverse to any other tab then come back to same remote register tab.
Example:
If I select 0x05 register in remote register tab and moved to information tab and again come back to same remote register tab, the 0x05 register is missing in the list. Screenshot is attached for better understanding.
Kindly do the needful to solve the above issue.
P.S. But I am able to send/receive I2C data at SDM4 through serializer (DS90UB925) EVM.
Thanks,
Jaisshri.C