• State Resolved
  • Locked Locked
  • Replies 8 replies
  • Subscribers 34 subscribers
  • Views 2677 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DPS Dongle for DS125DF410EVM

Ryuji
Guru 20090 points
Other Parts Discussed in Thread: USB2ANY, DS125DF410EVM, DS125DF410, ALP, DPS-DONGLE-EVM

Hello,

Our customer purchased the EVM however we don’t have the DPS dongle.
Could you please send two set of DPS dongle to us?

I send the e-mail to the mailing list which is described on the following URL.
http://www.ti.com/tool/DS125DF410EVM

However, I received return message from the mailing list due to I don't have permission.

Also , could you please let me know the difference between the DPS dongle and USB2ANY?
Is this pin assign of connector only? If yes, can we use the EVM by USB2ANY?

And,the DS125DF410EVM have the micro USB connector.
Could you please let me know the use of this connector?

Best Regards,
Ryuji Asaka



Best Regards,
Ryuji Asaka

  • 0
    TI__Intellectual 870 points
    Hi Ryuji,

    To manage the DS125DF410EVM, there is no need for external dongle board.
    The dongle board circuit has been integrated on the EVM.

    Please reference the user's guide for this EVM for how to control this board.
    www.ti.com/.../snlu126

    Please connect the board with PC using a USB cable by the mico USB connector.

    Regards
    Liang
  • 0 in reply to Liang Liu1
    TI__Mastermind 29635 points

    Hi Asaka-san,

    As a slight adjustment to Liang's comment, he is referring to a SPA dongle board circuit integrated on the EVM that supported a previous generation of software used by the DS125DF410, called ALP (Analog LaunchPad). We have used this software to control the DS125DF410 until recently.

    In the past few months, we have upgraded our interface to "SigCon Architect," and the new software exclusively works with a DPS-DONGLE-EVM (or USB2ANY equivalent). We have also recently updated the DS1250DF410EVM User's Guide documentation to reflect this change as well. To acquire a DPS-DONGLE-EVM, please contact our marketing at dps_marketing@list.ti.com.

    Thanks,

    Michael

  • 0 in reply to Michael Lu (Santa Clara)
    Guru 20090 points

    Hello Michael san,

    I already send the message to dps_marketing@list.ti.com.
    However I got the following return message. Thus, I posted about dps dongle to E2E.

    ----------------------------------
    The message you sent to the mailing list dps_marketing, with the subject line:
      DPS Dongle for DS125DF410EVM
    was not sent to the list subscribers because you do not have permission to send messages to this mailing list.
    If you did not send a message to the mailing list named above, be aware that the named list may be subscribed to a list to which you did send a message. In that case, only the subscribers of the named list did NOT receive your message.
    If you want to request permission to send messages to the named list, please contact the list owner.
    ----------------------------------

    Can I request the dps dongle to this forum?
    If no, could I have the permission to send messages to the dps_marketing@list.ti.com?

    My e-mail address is the following.
    asaka-r@clv.macnica.co.jp

    Best Regards,
    Ryuji Asaka

  • 0 in reply to Ryuji
    TI__Mastermind 29635 points
    Hi Asaka-san,

    Thanks for letting us know. We will try to figure out what is going on with the mailing list. In the meantime, we will work with you offline directly.

    Michael
  • 0 in reply to Michael Lu (Santa Clara)
    TI__Mastermind 29635 points
    Hi Asaka-san,

    To close out this thread appropriately, we have made the changes in the mailing list so that no pre-authorization is required to send a request to the mailing list.

    Thanks,

    Michael
  • 0 in reply to Michael Lu (Santa Clara)
    Guru 20090 points
    Hello Michael san,

    Thank you for changing the mailing list rule.

    Best Regards,
    Ryuji Asaka
  • 0 in reply to Michael Lu (Santa Clara)
    Expert 1060 points
    Hi Asaka-san,

    Did you get your DPS Dongle for DS125DF410EVM ? Did it work for you? I am working on the same problem and try to make it work. Could you share your experience here?

    Thanks and best regards,

    Bugra
  • 0 in reply to Redwood
    Guru 20090 points

    Hello Bugra san,

    I got the DPS Dongle however, my customer is request the I/F board urgently, I used USB2ANY for I/F between PC and DS125DF410EVM.
    And this is no problem.

    Best Regards,
    Ryuji Asaka