Dear all,
I'm working on retimer (DS125DF410) to configure Ethernet mode.
Could you please show me the registers that I need to configure to Ethernet mode.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear all,
I'm working on retimer (DS125DF410) to configure Ethernet mode.
Could you please show me the registers that I need to configure to Ethernet mode.
Hi. The DS125DF410 actually defaults to 10GE/1GE retimer mode. But you may configure a given channel to Ethernet mode by writing 0xF6 to channel register 0x2F. Moreover, you may choose to do a broadcast command to configure all four channel to Ethernet mode as per below:
0xFF 0x0C //Select broadcast write
0x2F 0xF6 //Ethernet mode
Regards,
Rodrigo Natal
DPS Applications Engineer