This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS80PCI402 EEPROM DATA

Other Parts Discussed in Thread: DS80PCI402

Hi,

I have a question regarding the EEPROM data for the address 12d - 15d on page 25, tablo 8. There is no comments on that address but the EEPROM data shows a value. In the multi DS80PCI402 mode: there are those values shown on page 20, chapter 8.6 Register from the single mode map?

DS80PCI402 EEPROM.pdf

Best regards, Xaver

  • Hi Xaver,

    Yes, the values shown in Table 7 (Section 8.6) that you have identified match the ones you saw in Table 8. The reason that they are in different locations is due to the starting EEPROM Address Byte. In Table 7, for the single device, the data begins at Address Byte 0x03. In Table 7, for the multi-device example, the data begins at Reg 0x0B (as noted in the Address Map Header, located in EEPROM Address Byte 0x04).

    For more information about EEPROM mode operation, please reference SNLA228: http://www.ti.com/lit/an/snla228/snla228.pdf

    Thanks,

    Michael