This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TCA9534
I read some of the posts about TCA9534 in this forum but I still have a question about if I understand the
5V tolerance of IO pins correctly.
I plan to use some TCA9534 in a 1.8V environment. All pins should be used just as outputs to setup different
devices more or less statically. 6 pins drive 1.8 V logic, but 2 pins must be connected to 3.3V and 5V devices.
I'm now not sure if I can mange that with the device. In the datasheet it stated, IO pins are 5V tolerant.
But I have doubts if it is real the case also for outputs. (regarding functional block diagram).
Would it work if the 3.3V and 5V pins are configured as outputs which output value log. LOW and
in case of log. HIGH, if the pins are configured as inputs, provided there is a pull-up to 3.3V and 5V ?
If yes, would it be a save solution ?
In reply to Bobby Nguyen:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.