TI E2E Community
Industrial Interface Forum
DP83848C pin to pin DP83848I ?
Vengadesh here from avnet . One of my customer has been using NSC DP83848CVV ( commerical temperature ) part for thier products with LP2378 processor . Now they want to replace with industrial temperature . we had suggested the DP83848IVV. They have replaced with DP83848IVV but communication is not working ? what could be reason ?
MAC we have update based on DP83848IVV ?
Please advice ASAP.
The DP83849CVV and DP83849IVV are pin for pin compatible. There should not be an issue using the DP83849IVV.
Can your customer provide any additional information (example schematics) that we could review?
Hi John ,
Thanks for your support , Are you taking about the DP83849 or DP83848 ? MAC or driver will be same for both DP83848V & DP83849 ?
I will try to get the schematic if the problem is still persist .
The DP83848CVV is also pin compatible with the DP83848IVV.
Thanks for your support. DP83848I is working in customer proto board. Customer also want to evalute the TLK110 ? i had checked it is similar PIN / Package whether it is pin to pin compactitable with DP83848I & DP83848C ? Pin no.21 (SW_STRAPN )--->pls confirm the function ? .
Section 3.8 of the TLK110 data sheet provides a very good description of the function of pin 21 (SW_STRAPN).
On the DP83848C/I devices pins 20 and 21 are reserved and should be pull to 3.3V through 2.2K Ohm resistors.
On the TLK 110 if pin 21 is pulled to 3.3V through a 2.2K Ohm resistor the software strapping function is disabled.
Pin 6 on the DP83848C/I provides TXD_3 and SNI_MODE , pin 6 on the TLK110 only provides TXD_3.
All other pins on the DP83848C/I and the TLK110 match.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.