TI E2E Community
Industrial Interface Forum
DS90LV011A & DS90LV012A I/O model
I wonder if I can refer the equivalent schematic mode of
DS90LV011A -CMOS input -LVDS outputand DS90LV012A -LVDS input. -CMOS outputI want to refer them to know the ESD protection circuit structure.
Sorry, but I/O drawings are not published on these devices. They are CMOS structires and in general high impedance.
DS90LV011ALVCMOS input ABS MAX states, -0.3V to +3.9V, there is no didoe to VDD.LVDS output is -0.3V to 3.9V also, again no direct diode to VDD path.
DS90LV012AFeatures notes Power Down High Z inputs (LVDS)Vin (LVDS) ABS MAX is -0.3V to 3.9V also. (LVDS) - no supply diode.LVCMOS (output) notes -0.3V to (VDD+0.3V) - this implies diode to substarte and also diode to VDD rail.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.