I'm looking for an IBIS models for the DS34LV86T RS-422 quad receiver. Looking at the data sheet for the TI DS26LV32AT, this part looks to be 100% identical as far as electrical and timing specifications. Even the V-I curves match exactly. Do these two parts share the same design, such that I can use the IBIS model created for the DS26LV32AT to simulate a DS34LV86T? The DS26LV32AT model is available, so hoping this is the case. I would of course use the same package type I anticipate using with the DS34LV86T.
The DS34LV87 & DS26LV31 feature the same IO and only differ by the enable scheme. The DS34LV86 & DS26LV32 feature the same IO and only differ by the enable scheme. There are only basic IBIS models for the master devices DS26LV31/2 - suggest to use those for this family.
DPS APPS / SVA
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.