5962-9163901M2A (DS26C31)bond wires

MG74275

Intellectual 290 points

What size are the bond wires used in a 5962-9163901M2A (DS26C31) diameter and length

What is the material

Can you provide an estimation on the fusing current?

over 8 years ago

0 Kirby Kruckmeyer96848 over 8 years ago

TI__Genius 17035 points

The bond wire is 1.25 mil aluminum. The maximum lenghth is 84.65 mil
From MIL-PRF-38535:Formula: l= K (d)^ 3/2
where: I= maximum allowable current in amps
d= diameter in inches (for round wires)
K = 30,000 for Au or Cu wire < 40.0 mils in length|
= 20,500 for Au or Cu wire > 40.0 mils in length
= 22,000 for Al wire < 40.0 mils in length
= 15,200 for Al wire > 40.0 mils in length

0 MG74275 over 8 years ago in reply to Kirby Kruckmeyer96848

Intellectual 290 points

Thanks for the quick response!

0 MG74275 over 8 years ago in reply to MG74275

Intellectual 290 points

How many bond wires are between the die and each pin?

0 Kirby Kruckmeyer96848 over 8 years ago in reply to MG74275

TI__Genius 17035 points

There is one bond wire between each pin and die pad.

Interface

Interface forum

5962-9163901M2A (DS26C31)bond wires