This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLK10232: TLK10232

Part Number: TLK10232

Hi,

  when I use TLK10232 at 10GKR mode, I use tester insert CV error. I check counter 0x10. it max value is 0xFF. Why it is not 0xffff? Do I need setup more?

Dump FPGA MDIO group 3 phy 06 dev 1e
00: 0610 0B26 8316 A848 1500 2000 F115 0000
08: 0000 0380 4000 0D10 0371 2F80 0000 1D23
10: 00FF FFFF FFFF FFFF 6963 8C02 F018 2000
18: 0C20 2500 4C20 1023 0000 300C 0000 0000
29/11/13 10:01:49 DEBUG>

1 Reply

  • Hi Cannie,

    We’ll look into this and get back to you next week.

    Regards,
    I.K.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.