• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 451 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Industiral Interface with reinforced isolation

Alisa Knorr
Prodigy 595 points
Other Parts Discussed in Thread: ISO1212, ISO1211

Hello, 

I am searching for an ndustrial (0-10V) interface with reinforced isolation for speed input. Is there any device, you could recommend?

BR 

  • 0
    TI__Intellectual 2325 points
    Hi BTS,

    Thanks for using E2E!

    Unfortunately we don't have a one chip solution for the exact _combination_ that is being asked here. Is there any flexibility here?
    Can you share more details please? (speed, end application, what is the problem trying to be solved etc.?)

    We have digital isolators with reinforced isolation that can handle 0 to 5.5V digital signals.
    On the other hand, we have high voltage digital input chips, ISO1211 and ISO1212, which can accept +/- 60V but offers only basic isolation.

    BAsed on the requirements, and If two chip solution is OK, then we can work with the TRX team to give you a HV input <> LV Digital Ouput , which can then be interfaced with a reinforced digital isolator like the ISO77XX to give you a potential solution.

    Please let us know if this is of interest.

    Regards,
    abhi
  • 0 in reply to Abhi Aarey
    TI__Intellectual 2325 points

    Dear User,

    Since a duplicate thread exists already on the Isolation forums (updated link ), with replies already, I will go ahead and close this one.

    Please continue to use that link for follow-ups.

    Thank you,
    Abhi

    PS: Edited post  to fix broken link. My apologies.