SN65C1168E: How to handle unused pins

Honda

Intellectual 260 points

Part Number: SN65C1168E

Hi All

My customer is using SN65C1168E for their 2ch RS422.
Then, they'd like to use same device for their 1ch RS422 too.

When they don't use the second driver and receiver of SN65C1168E,
how should they handle terminals?

Please advice

Best regards,
Honda.

over 5 years ago

0 Hao L over 5 years ago

TI__Mastermind 25705 points

Honda-san,
You can disable the driver by setting the second DE low and leave the output float. For the receiver, you can leave the inputs not connected. The internal bias sets the RX output high. Please let me know if you have more questions.
Regards,
Hao

0 Honda over 5 years ago in reply to Hao L

Intellectual 260 points

Hao san

Thank you for reply.
I will advise them.

Best regards,
Honda

Interface

Interface forum

SN65C1168E: How to handle unused pins