This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
New to this forum and I am a completely dummy when it comes to communication. I am limited on the cables I have and am wondering if this would work. I am attempting to talk to a flow transmitter that has 232 communication. the device has 3 pins to connect to. I currently have a usb serial cable ("black box" cable with 9 male pins). I also have a kayden sca cable which I believe is a rs 232 to 485 converter. can I plug this into the serial cable, and then run 3 wires from the terminal connections (transit, receive, gnd) to the 3 pins (clamp them onto pins) on the flow transmitter to connect? or will this not work since this is a 232 to 485 converter and the device uses 232. attached are some pictures
In reply to Max Robertson:
Hopefully these pictures attached properly this time
In reply to Jesse E:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.