MAX3232: Current Consumption of the Transceiver

Karthik B

Part Number: MAX3232

Hi Team,

I need to know about the current consumption of MAX3232EIPWR part for making power budget of my board , Its not suggested in Datasheet , Is there any document where the current requirement is mentioned please suggest.

Regards,

Karthik

over 5 years ago

0 Hao L over 5 years ago

TI__Mastermind 25705 points

Karthik,
Can you give a bit of more details about the use case, like the supply voltage, how many TX channels are on, the resistive and capacitive loading of each channel, the maximum data rate? We can provide you the power dissipation data. You can refer to this post for some discussion. e2e.ti.com/.../active-rs232-power-consumption-why-isnt-it-in-the-data-sheet
Regards,
Hao

0 Karthik B over 5 years ago in reply to Hao L

Expert 1300 points

Hi Hao,
Thanks for your reply
Supply voltage is 3.3V
one TX channel is used, and am not sure about the capacitive / resistive load and max datarate is the speed that this IC supports.
Regards,
Karthik

0 Hao L over 5 years ago in reply to Karthik B

TI__Mastermind 25705 points

Karthik,

In that case, you can use this graph for estimation, which shows the power data of 1 channel with 3kOhm load (most common application case).

Please let me know if you have more questions.

Regards,

Hao

Interface

Interface forum

MAX3232: Current Consumption of the Transceiver