Other Parts Discussed in Thread: TUSB8041
Hi,
How do we program the OTP? The data sheet says to contact TI for details, any help would be greatly appreciated.
Thanks,
Brandon
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Brandon,
The efuse/ OTP programming is done by putting the TUSB4041 in a programming mode and programming it over USB. No special configuration is required. As the name "OTP" implies, once the efuse is programmed it cannot be undone.
Regards,
JMMN