• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 423 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS65982

TPS65982: combine solution of TPS65982 + HD3SS460 + TPD8S300 in the feature?

Kay Chen53
Expert 2225 points
Part Number: TPS65982
Other Parts Discussed in Thread: HD3SS460, , TPD8S300

Hi there:

our customer was interested about whether this combination will be happen in the feature road map?  function include TPS65982 + HD3SS460 + TPD8S300 all in one?

or what maybe the next road map for the type-C PD controller and DP control 

If the application is digital projector or DLP application 

thanks again.

  • 0
    TI__Mastermind 27525 points
    Hello Kay,

    Just to clarify your question, are you asking if TI has future plans of releasing a part that has the functionality of the TPS65982, HD3SS460, and the TPD8S300 all in a single IC?
  • 0 in reply to Adam Mc Gaffin
    Expert 2225 points

    Hi Adam:

    That's correct!

    perhaps the application in an smaller DLP device with type-C port in the feature.  

  • 0 in reply to Kay Chen53
    TI__Mastermind 27525 points
    Hello Kay,

    Unfortunately there are no plans at this time to create a new IC that has all of these features. All of these parts, especially the PD controllers, are very complex so integrating all of them into a single chip would be a large undertaking. Also, it would limit the markets that the part can be sold in, because not everyone needs all three of those functions.

    As far as DLP with a Type-C port, I do not know of any designs that integrate these two technologies together, but we do have a PD controller EVM that follows the booster pack layout. So in theory, if you find DLP evm that also follows the booster pack architecture, you should be able to connect the boards together and integrate the two. I would do some more research on this as I have never done something like this before, but it may be a good starting point. Here's a link to the PD controller EVM page mentioned.

    www.ti.com/.../tps65982-evm

    Let me know if this helped you or not! If so, please click This resolved my issue