TXS02612: TXS02612

If the customer is looking for a voltage translator, we have a wide variety available. Can you help us to narrow down their requirements?

The TXS02612 has 6 lines of translation, 5 of which are bidirectional (data goes both ways on the wire) and 1 of which is unidirectional (data goes one way on the wire).

Since they do not need the selection capability of the TXS02612, we could recommend a variety of other parts to fit the requirement.

Can you share the total number of translation lines required, their directionality (unidirectional vs bidirectional vs direction controlled) and the bit rate required?

Dear Sir,

Customer using it to connect with the SDIO of TI WL1833 Wi-Fi/BT module, so there will be 5 bidirectional (4-bit data and command) and one unidirectional (clock), and the clock rate is 50MHz. Pls help recommends good solution with lower cost.

Thanks, Ian. 

Hello Ian,

I believe the only other possible solutions would be the TXS0108E or LSF0108, both of which are more expensive than the TXS02612. Unfortunately, I don't think we have a cheaper solution than the TXS02612.

Hi Ian,

The TXB0106 is the part I would recommend for your customer. It has 6 bidirectional channels and operates at 50 MHz at voltages > 2.5V.

Regards,

Aaron

But the TXB0106 still more expensive that the TXS02612 so that kind of defeats the purpose.

You are right. Sorry, I must have misread the pricing.