This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

• TI Thinks Resolved

# SN74AVC16T245: Power Calculations

Part Number: SN74AVC16T245

SN74AVC16T245
1) page no 5 of datasheet: here it is written contineous current through each Vcca, Vccb and GND; since it contains 2 Vcca , 2 Vccb and 8 GND. So, what should be total current rating for purpose of power calculation.
2) what is the value of resistance in directional circuit for Vin 1.8V (as it is not mentined anywhere)

• Hi Deep,

You can consider the Ioh Iol value as per the electrical characteristics for power calculation. Each IO channel is capable of providing current as rated in the electrical char table.
DIR pin is high impedance input and hence the value of resistance will be very high. It can be calculated using the input leakage current spec from the electrical char table.

-Thanks,

Shreyas

Watch the Introduction to AXC Family

Read the app note on Power Sequencing for the AXC family

Evaluate the AXC8T245 EVM and watch the translation using the EVM

• In reply to ShreyasRao:

Shreyas,

thanks for your reply.

But in my design require conversion of 1.8V to 3.3V at all 16 channels.
In such situation what will be the approximate power consumption of this particular component.

Thanks.

Regards,
Deep
1.8V to 3.3V, all 16 channel used
• In reply to Deep Sharma:

Hi Deep,

This application report goes into detail on how to calculate power consumption: CMOS Power Consumption and Cpd Calculation

#### Have a question about Logic ICs? Get it answered with our newly updated Logic FAQ page

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.