• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 414 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0108E: Asking for the TXS0108E's operation on open-drain mode and push-pull mode

SHH
Mastermind 30251 points
Part Number: TXS0108E


Hi Team,
TXS0108E has 2 kinds of operation modes, there are open-drain and push-pull.
How to set the different mode?

Thanks,
SHH

  • 0
    TI__Guru 55990 points
    SHH,

    There is no setting as such to be done.
    This device belong to auto direction family of translators. The incoming signal can be open drain or push pull and the device will recognize the direction automatically before translating up or down on the other side.