This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0108E: How to set push-pull or open-drain automatically ?

Part Number: TXS0108E

Dear TI expert,

There are some questions about TXS0108E ?  Would you like to help?   many  thanks;

1.How to set push-pull or open-drain automatically ?

2.Continuous output current is -50ma to 50ma,is total current ? or per I/O ?5153.Doc1.docx

  • Hello Cris,
    For (1):
    I'm not sure what you mean - there is no mode setting to the TXS0108E. It is compatible with both open-drain and push-pull applications. Please see the functional block diagram in the datasheet for a detailed look at how the device operates.

    For (2):
    Continuous output current is a maximum rating per output. The only time you might exceed this is while the one-shot is firing and the output is shorted to Vcc or GND.