Part Number: ISO7741
I am checking the ESD standard of ISO7741.
Can I prepare oscilloscope waveform data when ESD of each standard (eg IEC 60601-1, IEC 61000-4-2) is applied to the signal terminal?If you do not have an oscilloscope waveform, can you give me a report on ESD test results?
I do not have an oscilloscope waveform ready, but I can definitely give you some more information on these standards and if we meet them.
The product folder of each of our isolation devices also has the certifications each device has met under the technical documents tab (found under "More Literature"). Here is a link to the CSA Certification of the ISO7741. IEC60601-1 is covered in that certification I believe. As to the other example you gave, IEC 610000-4-2, is a system level test, not a component level test, and so therefore a certification is not appropriate there. Perhaps I can help in this way: what level of ESD barrier protection are you trying to achieve with your design?
In reply to Dan Kisling:
I thought that I saw the following thread and conformed to IEC61000-4-2.e2e.ti.com/.../611333
ESD specification(IEC61000-4-2) at the system level, so I agree with your comment.Confirm the ESD immunity required by the application to the designer.
In reply to cafain:
With ESD requirement specification of 4kV withstand voltage, we are considering to use it for interface with AD-converter in medical application.
Do you need any other information?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.