This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: ISO7721
I'm new to the ISO7721 device and have recently incorporated it in our design. We run a serial UART interface through this device.
Unfortunately it doesnt seem to be working. I see the data at the input pins but it does show up at the output side. e.g. pin 3 in TXD from MCU where pin 6 is the ouput. I see data at pin 3 but not at pin 6.
The voltage supply is fine within the range. What am I missing?
Appreciate you help!
In reply to Alex Ballantyne:
In reply to Abhi Aarey:
In reply to Koteshwar Rao:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.