Part Number: ISO1540
Please provide impulse voltage withstand rating for ISO1450 part as per EN 60664-1 standard
Thanks for bringing your specification questions to our E2E forum!
We test Surge or Impulse voltage according to DIN V VDE V 0844-11:2017-01 but since all these standards refer to the 1.2/50 us impulse waveform, the equivalent rating according to EN 60664-1 will be 4 kVpk. We guarantee that the device will pass 4 kVpk surge/impulse strikes.
Let me know if you have any questions!
In reply to Dan Kisling:
Thanks for the information. can you please confirm the attitude for 4KV specification.
In reply to Rohit Murkar:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.