This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

ISO7821: Too much current

Part Number: ISO7821

After replacing a Silicon Labs device (SI8622BD-B) with the ISO7821F, the device is drawing too much current, the engineer wants assistance with determining the cause of this.

  • Hi Devon,

    Thanks for bringing this issue to our attention.

    1. Could you supply me with the schematic?
    2. How much current is the SI8622DB-B drawing?
    3. How much current is the ISO7821F drawing?

    Best regards,
    Dan
  • In reply to Dan Kisling:

    Hi Devon,

    I haven't heard from you in a few weeks so I'm going to assume you were able to resolve this current draw issue on your own. If this is not the case, please respond to this thread or create a new one and I will be happy to support you.

    Best regards,
    Dan

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.