This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: ISO7331-Q1
There is a data transfer error issue. I checked the waveform at pins which are pin 3, pin 4, pin 5 and pin 12.
Pin 3(yellow) is CS signal from MPU. Pin 4(blue) is CLK of SPI. Pin 5(purple) is DATA out of SPI. PIN12(green) is ADC DATA of SPI.
Pin 5(ch3) and pin 12(Ch4) should be almost identical but the second bit of data became mismatch. This waveform is probed ISO7331 pins.
Why this kind of thing happens?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Koteshwar Rao:
In reply to Toshihiro Watanabe:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.