This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: ISOW7841
My customer is designing for DMX /DALI application for lighting FY2019 model.
Do you have isolated RS-485 with DC/DC converter?
I am offering customer as following .
( I like SN65HVD1781 dut to its high bus voltage )
MCU== ISOW7841==SN65HVD1781===> ( RS-485 line > == termination
My concern is output available load current of ISOW7841.
I think it depends on application. But how do you think?
5V : >130mA 3.3V: >75mA
Do you have any another idea for " RS-485 with DC/DC converter "?
Thanks for bringing this question to E2E!
There is actually a TI Design very similar to what you have proposed. This would probably be the smallest combination solution and the simplest design.
Another option to consider would be an isolated RS-485 transceiver and a discrete isolated DC-DC. See example below with ISO3082 and SN6505.
For an isolated DC-DC you could use a transformer driver like SN6505 and a transformer. The SN6505 can supply 1A with 5V supply, so you'll have plenty of headroom on that supply. You could even power a few other devices.
The downside with this solution is that we do not currently offer an isolated RS-485 transceiver with +/-70V bus-pin fault protection. There are discrete ways of implementing this (a combination of TVS diode and PTC fuse for example could accomplish this).
We also have a few devices with with a built in transformer driver such as ISO3086T. The transformer driver is integrated inside the device, so only an external transformer and (optional) LDO would be needed. This would again not be +/-70V bus-pin fault tolerant, but a discrete solution could be done.
Does this answer your question?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Dan Kisling:
Thank you very much for your answer so immediately!!
Its so helpful to start design for customer.
After DIN, I may have futher question .
In reply to Kanji Shibatani:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.