This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

ISO7721: ISO7721DWV When will complete Safety

Prodigy 135 points

Replies: 11

Views: 1267

Part Number: ISO7721

ISO7721DWVR  have no safety-relate certification now. Pls. check for me urgently

When this parts will have certificate? 

 

ISO7721DWVR  have no safety-relate certification now. Pls. check for me urgently

When this parts will have certificate? 

 

If already have. Sent me evident to show my safety testing party.

  • Hi Michael,

    I have contacted our certifications expert to give us more information on the safety-related certifications for the DWV package of the ISO7721. He is on business travel right now, but I have requested that he look at this request urgently. I will update you with any information as soon as we get it.

    Best regards,
    Dan
  • In reply to Dan Kisling:

    Hi Dan,

    Thanks, we like to know the schedule when will complete safety, because we selected this package to use in project that was recommend from our safety.

    Thanks in advance,

    BRs,
    Michael WS
  • In reply to Michael WS:

    Hi Michael,

    We will be updating the ISO7721 datasheet soon with the new certificates for the DWV package. That will take some time. Which specific certificates are you looking for? I may be able to reach out to you over E2E messenger and provide specific certificates in the short term. Can you accept my E2E friendship request so I can share private messages with you?

    Thank you for your patience. Best regards,
    Dan
  • In reply to Dan Kisling:

    Hi Dan,

    Thanks, I already accepted your E2E friendship requested, please share me the new certificates for the DWV package or you may share the schedule when will complete Safety/ updating the ISO7721 datasheet.

    Thanks in advance,

    BRs,

    Michael WS

  • In reply to Michael WS:

    Hi,

    All safety certificates for ISO7721 DWV package are complete.

    All updated certificates (except VDE) are available in the product folder at:

    The updated VDE certificate is expected to be available at the link above by the end of this week.

    Saleem Marwat

    System Engineer

    Isolation Products, Texas Instruments

  • In reply to Saleem Marwat:

    Thanks Saleem!

    Michael,
    As our systems engineer has been able to update the links online I no longer believe sending these over private message is necessary. I've marked Saleem's response as the answer. If you have any further questions please let me know.

    Best regards,
    Dan
  • In reply to Dan Kisling:

    Hi Dan / Saleem Marwat,

    Thanks for your reply that help us to clear, just some question from our Safety team they request as below, can you help to reply again to resolve this issue?


    *************************
    Certify body requested certificate and per below requested.

    IEC 60950 for REINFORCED insulation for min working voltage of 240Vac rms is required = HV min 3000Vac rms HV withstand + creepage ≥5mm between pins across body. Approval by TUV or VDE ok.
    *************************

    Thanks in advance,
    BRs,
    Michael WS
  • In reply to Michael WS:

    Hi Michael,

    Yes, ISO7721DWV meets all these requirements. TUV certificate is available online.

    Saleem Marwat

    System Engineer

    Isolation Products, Texas Instruments

  • In reply to Saleem Marwat:

    Dear Dan/ Saleem Marwat/

    Can you share us Hard copy of certificate in this time ?

    Because safety team they need this document to process Safety to support end-customer to meet schedule.

    https://e2e.ti.com/support/isolation/f/1013/p/737821/2733504#2733504

    Thanks & Best Regards,

    Michael WS

     

  • In reply to Michael WS:

    Hi Michael,

    I sent you copies of certificates through your email.

    Saleem Marwat

    System Engineer

    Isolation Products, Texas Instruments

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.