ISO7721: ISO7721DWV When will complete Safety

Michael WS

Prodigy 135 points

Part Number: ISO7721

ISO7721DWVR have no safety-relate certification now. Pls. check for me urgently.

When this parts will have certificate?

ISO7721DWVR have no safety-relate certification now. Pls. check for me urgently.

When this parts will have certificate?

If already have. Sent me evident to show my safety testing party.

over 5 years ago

0 Dan Kisling over 5 years ago

TI__Expert 6195 points

Hi Michael,

I have contacted our certifications expert to give us more information on the safety-related certifications for the DWV package of the ISO7721. He is on business travel right now, but I have requested that he look at this request urgently. I will update you with any information as soon as we get it.

Best regards,
Dan

0 Michael WS over 5 years ago in reply to Dan Kisling

Prodigy 135 points

Hi Dan,

Thanks, we like to know the schedule when will complete safety, because we selected this package to use in project that was recommend from our safety.

Thanks in advance,

BRs,
Michael WS

0 Dan Kisling over 5 years ago in reply to Michael WS

TI__Expert 6195 points

Hi Michael,

We will be updating the ISO7721 datasheet soon with the new certificates for the DWV package. That will take some time. Which specific certificates are you looking for? I may be able to reach out to you over E2E messenger and provide specific certificates in the short term. Can you accept my E2E friendship request so I can share private messages with you?

Thank you for your patience. Best regards,
Dan

0 Michael WS over 5 years ago in reply to Dan Kisling

Prodigy 135 points

Hi Dan,

Thanks, I already accepted your E2E friendship requested, please share me the new certificates for the DWV package or you may share the schedule when will complete Safety/ updating the ISO7721 datasheet.

Thanks in advance,

BRs,

Michael WS

0 Saleem Marwat over 5 years ago in reply to Michael WS

TI__Genius 9975 points

Hi,

All safety certificates for ISO7721 DWV package are complete.

All updated certificates (except VDE) are available in the product folder at:

The updated VDE certificate is expected to be available at the link above by the end of this week.

0 Dan Kisling over 5 years ago in reply to Saleem Marwat

TI__Expert 6195 points

Thanks Saleem!

Michael,
As our systems engineer has been able to update the links online I no longer believe sending these over private message is necessary. I've marked Saleem's response as the answer. If you have any further questions please let me know.

Best regards,
Dan

0 Michael WS over 5 years ago in reply to Dan Kisling

Prodigy 135 points

Hi Dan / Saleem Marwat,

Thanks for your reply that help us to clear, just some question from our Safety team they request as below, can you help to reply again to resolve this issue?

*************************
Certify body requested certificate and per below requested.

IEC 60950 for REINFORCED insulation for min working voltage of 240Vac rms is required = HV min 3000Vac rms HV withstand + creepage ≥5mm between pins across body. Approval by TUV or VDE ok.
*************************

Thanks in advance,
BRs,
Michael WS