This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

ISOW7841EVM: mounting holes dimensions

Prodigy 10 points

Replies: 3

Views: 189

Part Number: ISOW7841EVM

ISOW7841 quad-channel digital isolator with integrated DC/DC converter evaluation module: In the data sheet, it only show the dimension of the PCB length and width.  is there anyway for me to get the dimension of the three mounting holes? anybody has the 3D model (STEP) file? 

  • Hi Lynn,

    Welcome to the E2E forums!

    TI does not have models of this EVM available, but the location of the three mounting holes on the board are arbitrary: they can be placed on any clear PCB surface. Are you designing a circuit board with the ISOW7841? We are happy to recommend improvements!


    Thank you for choosing TI,
    Manuel Chavez

  • In reply to Manuel Chavez:

    Hi Lynn,

    Hopefully all is well. Just to clarify on your original post: is this question more for design considerations or are you interested in obtaining design files?


    Thank you for your time,
    Manuel Chavez
  • In reply to Manuel Chavez:

    Greetings Lynn,

    Since there has been no response to this thread, it will be closed. Please feel free to respond to any of the questions above or create a new thread using the red and yellow buttons in the upper right corner of this window.


    Have a great week!
    Manuel Chavez

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.