This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: DLPDLCR2000EVM
We purchased a BeagleBone Black and LightCrafter DLPDLCR2000EVM and followed instructions in "DLPDLCR2000EVM: Quick-Start Tutorial" https://e2e.ti.com/support/dlp__mems_micro-electro-mechanical_systems/video_and_data_display/f/947/t/621466
PROBLEM: The DLP does nothing when we try "Step 10: As a test, you can bring up the BeagleBone Desktop on the projector with the following [i2cset] commands". (Same as Figure 8 in "LightCrafter Display 2000 EVM User's Guide".)
Likewise, the example /opt/scripts/device/bone/capes/DLPDLCR2000/MplayerTest.py fails to play video.
However, example /opt/scripts/device/bone/capes/DLPDLCR2000/Look.py *does* seem to work -- it displays Checker Box pattern (stored in EEPROM if I understand correctly). Also the DLP does show its splash screen after it's booted.
It seems that the BeagleBone can't access the RGB inputs to the DLPC2607.
Could the problem be related to "panel: probe of panel failed with error -22" entry in dmesg?
debian@beaglebone:~$ dmesg...[ 2.839431] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,000C,1716BBBG1301'[ 2.839461] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4[ 2.864626] bone_capemgr bone_capemgr: slot #0: No cape found[ 2.895614] bone_capemgr bone_capemgr: slot #1: No cape found[ 2.928269] bone_capemgr bone_capemgr: slot #2: No cape found[ 2.958115] bone_capemgr bone_capemgr: slot #3: 'DLPDLCR2000,00A0,TI,DLPDLCR2000'[ 2.966053] bone_capemgr bone_capemgr: initialized OK.[ 2.968695] PM: bootloader does not support rtc-only![ 2.982180] pinctrl-single 44e10800.pinmux: pin PIN40 already requested by 0-0070; cannot claim for panel[ 2.999933] pinctrl-single 44e10800.pinmux: pin-40 (panel) status -22[ 3.012726] pinctrl-single 44e10800.pinmux: could not request pin 40 (PIN40) from group pinmux_bb_lcd_lcd_pins on device pinctrl-single[ 3.036879] panel panel: Error applying setting, reverse things back[ 3.049778] panel: probe of panel failed with error -22[ 3.051925] bone_capemgr bone_capemgr: slot #3: dtbo 'DLPDLCR2000-00A0.dtbo' loaded; overlay id #0
Can you suggest next troubleshooting steps?
Regards, Eric Bakeman
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Eric Bakeman:
Please make sure you read the forum guidelines first.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.