TI E2E Community
SN74LVC2G07 input question
My customer had a question regarding the LVC2G07 device.
Currently, I have two digital inputs going into a SN74LVC2G07. Input A has a range of 0-3.3V. Input B has a range of 0-5V. The outputs are tied together and pulled up to 3.3V with a 10k resistor. With the Vcc pin = 3.3V and Input A = 5V, will the device function normally and tolerate the 5V on the input?
All LVC family gates have 5V tolerant inputs.
Best regards,Edwin Krasser
I see that, thanks...
Page 3 of the datasheet. Input and output up to 5.5V.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.