I want use the SN74ALVCH16245 to transform the data which the rate is 150Mbps, is it correctly?
I want get the maxium data rate from the datasheet, but I did not find it. Please tell me which parameter reflects maxium data rate .
Fmax is 150Mhz so MBPS should be 300
In reply to Chris Cockrill:
I couldn't find this parameter in the SN74ALVCH16245's datasheet.
Where would I find the parameter in this datasheet?
In reply to wangzhi:
Fmax will not be specd on buffers. It is only spec on devices with clocks. The easiest way to find Fmax is to look at a clocked part in that family.
I looked at the SN74ALVCH16374. It is best to choose a part with the same amount of outputs. or at least close.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.