• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 432 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problem : IBIS model of the device SN74LVTH16500

Andy Tan
Intellectual 2170 points

Hello,anybody can answer the question :

"The IBIS model of the device SN74LVTH16500 is not behaving correctly with Mentor Hyperlynx BoardSim v8.2.1 The fast-strong and slow-weak results seems to be swapped. Can you please let me know if this a known problem and any workaround to overcome this.]" 

There may be a problem for model ?

[Steps Needed to Recreate Problem:

Assign the IBIS model into any Hyperlynx project and simulate for slow-weak and fast-strong corners to see the problem