Pls help to provide over shoot & under shoot parameters of below logic parts SN74LV273APW, SN74AHC08PW, SN74LV125APW
Also pls provide if any graphical representation - which show acceptable undershoot/overshoot against time
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Pls help to provide over shoot & under shoot parameters of below logic parts SN74LV273APW, SN74AHC08PW, SN74LV125APW
Also pls provide if any graphical representation - which show acceptable undershoot/overshoot against time
We do not take overshoot and undershoot data. Overshoot and undershoot will depend on the load and circuit board conditions. Higher drive parts will generally have higher overshoot and undershoot.. The parts you have listed are very low drive and will have very clean signals.
Typical rule of thumb is that the overshoot and undershoot can be 1V below gnd and 1V above absolute max for less than 10ns.