This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVTH241: sn74lvth241 holding input signal

Part Number: SN74LVTH241

Hi TI team.

I have tested using sn74lvth241pwr (buffer) in my application.

The problem is Input of buffer keeps the 'H' signal after a single pulse. What is reason input is not back to 'Low' when disappea single pulse.

The output of buffer is low and OE pin of sn74lvth241 is disable at this time.

Do you have any idea about this problem?