This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] Where do I connect the thermal pad of the logic QFN devices?

Mastermind 44380 points

Replies: 0

Views: 674

The thermal pad is recommended to be soldered to the PCB and electrically connected to the ground for the best thermal and mechanical integrity.

It can be left floating, and does not have to be soldered down if thermals are not a concern for your design.

It is not recommended to be connected to any other pin.



Watch the Introduction to AXC Family

Read the app note on Glitch-free Power Sequencing for the AXC family

Evaluate the AXC8T245 EVM and watch the translation using the EVM