This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

SN55462: What is the lead finish for this part (SNJ55462JG) ?

Prodigy 100 points

Replies: 4

Views: 101

Part Number: SN55462

Can you tell me what the lead finish is for this part?  SNJ55462JG

It would be helpful if the Material Content page on the website contained the information.  

Thank you!

  • Bill,

    This device is Sn63Pb37 solder dipped.

    If this answers your question, please click "This Resolved My Issue"
    Regards,
    Wade

  • In reply to Wade Vonbergen:

    Is that true for all A42 parts, or would I need to check on a case-by-case basis?

  • In reply to Bill Mackin:

    Bill,

    This is not necessarily conclusive.

    Your best way to tell for a QML for JAN device, would be to use the 5962- DLA/SMD part number.  The last character of the part number indicates lead finish.  If it ends in A, it is solder dipped.  If C, then gold plate.

    Regards,

    Wade

  • In reply to Wade Vonbergen:

    Thank you.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.