This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LSF0108
I am considering using the LSF0108RKS for QSPI transaction, but I want to know if this is the best option.
The QSPI interface will be between a 3.3V controller and 1.8V SPI flash.
The way QSPI will operate is that first, the controller will own the 4 data lines (IO[3:0]) for the first byte. Following the first byte, the slave will have control of the 4 data lines. We will be operating this bus at 25MHz.
Is this the best device to use for this application (and will it work)? Are there any better options available?
Any help would be much appreciated!
[FAQ] Are there voltage translation device recommendations for industry standard interfaces like GPIO, SPI, UART, I2C, MDIO, RGMII, I2S etc? recommends the TXB0106, which does not need external pull-up resistors.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.