I have a Windows Vista Home Premium 64-bit Service Pack 2 computer. I want to use SmartRF Studio 7 1.10.0 to test CC2530 chip with SmartRF05EB board.
I can verify from the Device Manager that SmartRF05EB is under “Other devices”, but SmartRF Studio 7 1.10.0 cannot see this device or any device.
Please let me know how to fix it.
could you check if/how the device is listed in the Device Manager panel? The SmartRF05EB should be listed there as a "Cebal controlled device" if the drivers have been installed properly.
The SmartRF05EB listed in the Device Manager panel as a "Other devices", but the CC2531 USB dongle listed there as a "Cebal controlled device". Neither one was seen by the SmartRF Studio 7 1.10.0.
The CC2531 dongle is not supported directly in SmartRF Studio, so it is correct that this device is not detected. In order to use the dongle in SmartRF Studio you will have to connect a debugger (e.g. CC debugger or SmartRF05EB) to the debug connector on the dongle. Then it will be detected by SmartRF Studio.
I would expect however that the SmartRF05EB was detected, and also listed as a "Cebal controlled device" in device manager. Could you please try to reinstall the driver for that board via the device manager? The Cebal drivers is typically found in this folder:
C:\Program Files\Texas Instruments\SmartRF Tools\Drivers\cebal
Thanks, it works now
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.