TI E2E Community
Low Power RF & Wireless Connectivity
Low Power RF Hardware & Tools Forum
Information about AGC and LNA of CC1101
I need some information about AGC and in LNA of CC1101 that I didn't find in the datasheet or others documentations.
The AGCCTRL0 allows freezing both the analog gain and the digital gain or only the analog gain. What are the analog and digital gain values when they are frozen? Can they be changed to another value? Can they be read?
1) The 2 LNA's are in series and is shown as one component in the block diagram
2) To manually set the gain set AGCCTRL0.AGC_FREEZE = 3 and set gain in register AGCTEST
LNA gain setting (00: maximum, 10: minimum)
LNA2 gain setting (000: minimum, 111: maximum)
Digital gain setting
Note: not recommended to manually set the gain. Leave the AGC free-running
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.