TI E2E Community
Low Power RF & Wireless Connectivity
Low Power RF Hardware & Tools Forum
SmartRF05 Eval board. How to use the RS232 port if my laptop does not have serial port?
I have been using the SmartRF05 evaluation board with CC2530 chip mounted on the CC2530 evaluation module.
I would like to get data from the CC2530 chip. One option would be to use the RS232 as given by examples in Serial App. But my laptop does not have a serial port. Are there any options around this. Will buying a RS232-USB cable help?
Can I use the existing USB connection which is being used for downloading code and debugging to get data from the 8051 present in the CC2530? (I doubt it...)
Thanks in advance, Sharat
You will need to invest in a USB-to-RS-232 cable or you could obtain the CC2531 USB dongle.
Thanks for your reply. I do have a USB-to-RS232 cable which I have connected.
However what driver do I use on the PC so that it recognizes this? The drivers provided for CC2531 are not of much use here are they? That is the usb_cdc_driver_ccxxxx.inf directory is not of much use.
A USB-to-RS-232 cable cannot "see" what is on the other side of the RS-232 port, so no drivers related to CC253x are involved - the cable manufacturer must provide the drivers for the USB side or may rely on default Windows drivers.
Spoke too soon. The driver which came with the cable itself was enough. I assumed that I would need a driver just like cc2531 to create a virtual port as in cc2531.
However I see that I can see the message on the hyperterm....they are a bit garbled though...I should be able to find a solution.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.