Browse by Tags

Tags

IAR EW8051

Forum Post: Re: CC2510 Load program problem

LPRF Rocks the World

What verison of IAR EW8051 are you using, Kickstart, Evalution or full version (7.51A)? What is your connection? Are you using your target board connect via SmartRF04EB, P14? What are your settings in [Projects] ->[Options] -> [Debugger] ->[Texas Instrument]? LPRF Rocks the World

on Aug 26, 2009
Forum Post: Re: CC2510 Load program problem

LPRF Rocks the World

Karel: Here are three suggestions: Suggestion #1: Looking at your settings you should selected [Verify download] -> [CRC-16]. Except from that things are looking ok. However IAR EW8051 7.51A does not have the Cache program code option. Turn this off. Suggestion #2: In addition you might check...

on Aug 27, 2009
Forum Post: Problem in ADC convertion

Maria Fernandes

Hello! I am using cc2431 and I am reading from ADC. I am reading from pin 5, with 10 bits of resulution and 3.3V as a reference tension in pin 7. I am having some kind of problem. With 3.3V of resolution, when I read 3.3V I sould have 1023 bit (2^10 - 1), but instead I have 511 bit (2^9 - 1...

on Jan 25, 2010
Forum Post: eZ430RF2500 End Point device code port to CC2510 EVM

Spincraft

I tested the eZ430RF2500 stick and it worked great in my application. Due to PCB size contrainsts we chose the CC2510 MCU. The code for eZ430 is based the MSP430 MCU which is not compatible with the 8051 using IAR workbench. I tried opening the ED.eww project and it fails to load. So, is there a way...

on Jan 21, 2010
Forum Post: Re: IAR configuration CC2431

esy

Hi Luciflore. You are right that it's a bit weird to only use 1 datapointer (DPTR) when the harwdare supports 2 DPTRs. However, the reason for currently only using 1 data pointer is that our previous tests have shown that the IAR C/C++ compiler for 8051 is not able to fully utilize the second...

on Aug 17, 2010
Forum Post: iar- cc2530 -8051core

Anubhav Gupta

hi ti i am using ti CC2530 as soc and IAR work bench. when new project is created then how to add start-up code in IAR for 8051 core. thanks and regards

on Feb 2, 2011
Forum Post: Re: USB protocol and CC2530 DK

Philipp L��mmler

i have the same problem... any clue how to fix it? a problem with the linker?

on Apr 13, 2011
Forum Post: Re: IAR 7.51 does not recognize CC debugger

TIABO

Hi, Have a look at this post for a suggested answer to your question: http://e2e.ti.com/support/low_power_rf/f/155/p/101682/356939.aspx#356939 Hope this helps! ABO -- PS. Thank you for clicking Verify Answer if this answered your question!

on Apr 18, 2011
Forum Post: CC2531 programming

Prianka Hasan

Hi, Can someone tell me from where I can download USB firmware library for the CC2531 chip? I went to TI website and found a zipped folder named " swrc088c". This folder has docs, driver, ide, source subfolders and a compiled HTML help file "usb_firmware_library". This page...

on Apr 22, 2011
Forum Post: IAR's files !

MilkyWay 05

Hello, I want to know what mean the file per_test.map ? And, je look that exist two files : per_test.hex and per_test.d51 what there are ? Thanks for your reponse. Linh

on May 16, 2011
Forum Post: Re: IAR 7.6 linker error

MilkyWay 05

Hello, i have the same problem, but when i change the linker by : C:\Program Files\IAR Systems\Embedded Workbench 5.4 Evaluation\8051\config\devices\Texas Instruments\lnk51ew_cc2530F256.xcl I have this error : Fatal Error[e72]: Segment BANKED_CODE must be defined in a segment definition option...

on May 19, 2011
Forum Post: Re: Link error while compiling SensorDemo - SensorEB-Pro project in IAR workbench

syed moulana

Hi It is ok now. " osalMcuDivide31By16To16 " function is included in OSAL_Math.s51 with its assembly language definition. Previously OSAL_Math.s51 was not included in SensorEB-PRO project files. Thanks Syed

on May 23, 2011
Forum Post: IAR 7.60 + Simpliciti 1.1.1 error

Jose Carmelo Rangel Breña

Hello I'm working with simpliciti using the SmartRF05EB + CC2530EV, first I was using the 7.51 IAR version to complile the code, but the IAR version doesn't recognized the RF05EV hardware for downloading the code, so I was looking aroun in the forum for help and I found a post in which says It...

on Aug 13, 2011
Forum Post: Re: CC2530

Igor Sherer

Hi Ameesh, Try to do the following: Open the samples in IAR studio. In Workspace window->files select the root of the project (i.e click on "light_switch - srf05_cc2530" for light_switch project). Open "project options" (or just click Alt+F7) Go to the Linker...

on Aug 16, 2011
Forum Post: Re: IAR EW8051 (7.30b) Does Not See CC Debugger Target for cc2430 Debug

Gary Wayne

Thanks for your suggestions, but problem persists. Reverted Cebal driver for CC Debugger to 2.0.0.0 per swra366. Also reverted to version 0019 of CC Debugger firmware. Rebooted system (Windows XP Pro -w- latest updates), connected CC Debugger to USB cable and then to target board. Powered on target...

on Oct 4, 2011
Forum Post: Use IAR workbench 7.30 and CC2430 demonstration Board to debug cc2530?

Hugo Morais

Hello, I have been using IAR workbench 7.30 and CC2430 demonstration Board (using pins available from header P5: DD, DC and reset) to program and debug cc2430s. Now, I would like to know if 1) Is it also possible to use CC2430 Demonstration Board to program and debug cc2530s? 2) Is it really...

on Oct 10, 2011
Forum Post: Re: Configuring IAR IDE for the CC2530; Benefit of configuring only 1 DPTR vs 2?

David Ximenes

I need this too!

on Oct 16, 2011
Forum Post: Configuring IAR IDE for the CC2530; Benefit of configuring only 1 DPTR vs 2?

Steve Gray

Is there a similar guide for setting up IAR IDE for the CC2530 as there was for the the CC1110/CC2430/CC2510 (swru038.pdf)? In particular, I am looking for guidance on whether it is better to use just 1 DPTR or 2, and if the latter, what the settings should be on the Options->GeneralOptions->Data...

on Oct 12, 2011
Forum Post: Re: CC1111 IAR QUICK STAR 4KB

KevinF

Hi, The link above doesn't appear to work anymore. Can someone help with how to extend the IAR 4K limit to 16K for SimpliciTI dev? I have a kit that was loaned to me but no software. I'm hoping to test it out before buying a kit. Thanks.

on Oct 27, 2011
Forum Post: CC1111 IAR QUICK STAR 4KB

MichelVinez

On IAR place there is specific tools for Texas LPRF chips based on 8051 cpu. But these tools are time limited , and after that customer Must expense 2000 to 4000 USD to develop . That is Not possible for some small companie . Do you know if there is any possibility to use the KICKSTART EDITION 4KB...

on Feb 24, 2011
Forum Post: What is the value of the internal reference voltage used for the ADC in CC2530?

Shreyas Venkatesh

I am actually using ADC in CC2530 to read a analog constant DC value and put it on the serial port. I am using z-stack for programming it. I am able read the value measured on the port AI0 in 8-bit resolution mode. But i don't know what does the value mean...??? I am not able to find the actual values...

on Nov 29, 2011
Forum Post: How write some data in flash memory?

Gleb Levitskiy

Hello all. I use CC2510F32 and I need write some configuration data to flash memory. For this I use the next code: __no_init volatile struct { addr_t F_Addr; uint8_t F_Num_group[NUM_OF_GROUP]; } F_Data @ 0x7C00; //reserving space in flash memory .................... static uint8_t Write_addr_to_Flash...

on Oct 18, 2011
Forum Post: How do you program the CC1111EMK868-915 development kit, CC1111 dongle, with eZ430 Chronos Access Point software?

Clinton Owen

How do you program the CC1111EMK868-915 development kit, CC1111 dongle, with eZ430 Chronos Access Point software? I am able to reprogram the CC1111EMK868-915 dongle using the CC Debugger and IAR 8051 (evaluation) but the AP (CC1111EMK868-915) doesn't respond when trying to use it with eZ430 Chronos...

on Jan 25, 2012
Forum Post: CC1110 How to write data to Flash memory

Chu En Ong

Hi, Is it cc1110 allow us to write data by coding? Do anyone know how to program so that I can write 32 bits data to flash? How to read it back as well... Thanks Ong

on Feb 8, 2012
Forum Post: System Clock & RF Packet Baud Rate

saci

Hi All, I use CC1110 SoC. I wonder how to decide that which system clock is minimum clock value for any RF packet baud rate. It is said that minimum system clock can be 203.125KHz for 10Kbaud and 1.625MHz for 250Kbaud in Datasheet and DN111 while waiting in RX mode for RF packet. Why required minimum...

on Feb 14, 2012