I got one TI panda board. I try to debug wifi module.
I find it uses ls240-wi-01-a20 module which should uses TiWi_R2 integrated wl1271 wifi transceiver.
I can get datasheet from http://www.lsr.com/products/radio_modules/802.11/tiwi-r2.aspx,
but the datasheet did not describe operation sequence via SDIO or something else in detail. So I still can not understand how to operate the module.
Where can I get this documentation?
Who can give me a answer?
I'm not sure that you can get these registers description. Since the host-wilink protocol is changes between FW versions.
- Elad Raz
This is addressed in the TiWi Wiki FAQs & other threads on the 2e2.
in the link that you provided there are only FAQ1 to 16, FAQ 45 is not there. is there other link?
I see the reason for the confusion, that is the auto-generated link to the entire FAQ section, it is not intended to be a link to a specific FAQ.
I was hoping FAQ's #2 and #7 would help the customer.
you are right.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.