root@Ours-A8rp:/media# cd /opt/ti-wireless/                                    
root@Ours-A8rp:/opt/ti-wireless# ls                                             
tiwlan.ini          wlan_cu                                
firmware.bin        tiwlan_drv.ko       wlan_logger                            
install.sh          tiwlan_loader       wpa_supplicant.txt                     
root@Ours-A8rp:/opt/ti-wireless# insmod tiwlan_drv.ko                          
[   24.456848] TIWLAN: driver init                                             
[   24.460113] TIWLAN SDIO init                                                
[   24.463165] LY:::sdioDrv_init                                               
[   24.469421] hPlatform_Wlan_Hardware_Init                                    
[   24.488891] drv->irq = 322, 2                                               
root@Ours-A8rp:/opt/ti-wireless# ./tiwlan_loader                               
root@Ours-A8rp:/opt/ti-wireless# ifconfig tiwlan0                              
tiwlan0   Link encap:Ethernet  HWaddr 00:00:00:00:00:00                        
          BROADCAST MULTICAST  MTU:1500  Metric:1                              
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0                   
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                 
          collisions:0 txqueuelen:100                                          
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)                               
                                                                               
root@Ours-A8rp:/opt/ti-wireless# ifconfig tiwlan0  up                          
[   37.076995] wlanDrvIf_Open                                                  
[   37.079833] wlanDrvIf_Start                                                 
[   37.082794] LY:::drvMain_SmEvent Start... !                                 
[   37.087158] LY:1:drvMain_SmEvent End !                                      
[   37.091064] LY:1:drvMain_Sm                                                 
[   37.093963] LY:::drvMain_SmEvent Start... !                                 
[   37.098327] LY:2:drvMain_Sm eStatus=0 End !                                 
[   37.102661] LY:1:drvMain_SmEvent End !                                      
[   37.106567] LY:1:drvMain_Sm                                                 
[   37.109497] LY:1:drvMain_SetDefaults,RoamingScanning_2_4G_enable =1852010051
[   37.180511] TIWLAN:                                                         
[   37.180511] ...init_config: invalid int value for <RxFemInsertionLoss_2_4G> 
[   37.180511]                                                                 
[   37.180511]                                                                 
[   37.180541] ###################### FEM0 parameters #########################
[   37.180541]                                                                 
[   37.180541] # (for Single bend 2.4G parameters FEM0 (RFMD 3.0) HDK20)       
[   37.180541]                                                                 
[   37.180541] #RxTraceInsertionLoss_2_4G = 0                                  
[   37.180541] #TXTraceLoss_2_4G = 0                                           
[   37.180541] #RxRssiAndProcessCompensation_2_4G  = ec,f6,00,0c,18,f8,fc,00,084
[   37.180572] #TXBiPReferencePDvoltage_2_4G = 0x0164                          
[   37.180572] #TxBiPReferencePower_2_4G  = 0x80                               
[   37.180572] #TxBiPOffsetdB_2_4G = 00                                        
[   37.180572] #TxPerRatePowerLimits_2_4G_Normal = 1c,1f,22,24,28,29           
[   37.180572] #TxPerRatePowerLimits_2_4G_Degraded = 19,1f,22,23,27,28         
[   37.180603] #TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50
[   37.180603] #TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,0
[   37.180603] #TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00                     
[   37.180603] #TxIbiasTable_2_4G  = 1a,1a,1a,1a,1a,21                         
[   37.180603] #RxFemInsertionLoss_2_4G  = 0x10                                
[   37.180633]                                                                 
[   37.180633] #################################################################
[   37.180633] ################################################## Radio        
[   37.308074] TIWLAN:                                                         
[   37.308074] ...init_config: invalid int value for <RxTraceInsertionLoss_2_4G
[   37.308074] TXTraceLoss_2_4G  = 0E                                          
[   37.308105] RxRssiAndProcessCompensation_2_4G = ec,f6,00,0c,18,f8,fc,00,08,1
[   37.308105] TXBiPReferencePDvoltage_2_4G = 177  #375 mV                     
[   37.308105] TxBiPReferencePower_2_4G = 80       #128 mV                     
[   37.308105] TxBiPOffsetdB_2_4G = 0                                          
[   37.308105] TxPerRatePowerLimits_2_4G_Normal = 1c,1f,22,24,28,29            
[   37.308105] TxPerRatePowerLimits_2_4G_Degraded =19,1f,22,23,27,28           
[   37.308135] TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50
[   37.308135] TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,5
[   37.308135] TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00                      
[   37.308135] TxIbiasTable_2_4G = 11,11,15,11,15,0f                           
[   37.308135] RxFemInsertionLoss_2_4G  = 0E  # 14                             
[   37.308166]                                                                 
[   37.308166]                                                                 
[   37.308166] ###################### FEM0 parameters #########################
[   37.308166]                                                                 
[   37.308166] # (for Single bend 2.4G parameters FEM0 (RFMD 3.0) HDK20)       
[   37.308166]                                                                 
[   37.308166] #RxTraceInsertionLoss_2_4G = 0                                  
[   37.308197] #TXTraceLoss_2_4G = 0                                           
[   37.308197] #RxRssiAndProcessCompensation_2_4G  = ec,f6,00,0c,18,f8,fc,00,084
[   37.308197] #TXBiPReferencePDvoltage_2_4G = 0x0164                          
[   37.308197] #TxBiPReferencePower_2_4G  = 0x                                 
[   37.437072] TIWLAN:                                                         
[   37.437072] ...init_config: invalid int value for <TXTraceLoss_2_4G> : 0E   
[   37.437103] RxRssiAndProcessCompensation_2_4G = ec,f6,00,0c,18,f8,fc,00,08,1
[   37.437103] TXBiPReferencePDvoltage_2_4G = 177  #375 mV                     
[   37.437103] TxBiPReferencePower_2_4G = 80       #128 mV                     
[   37.437103] TxBiPOffsetdB_2_4G = 0                                          
[   37.437103] TxPerRatePowerLimits_2_4G_Normal = 1c,1f,22,24,28,29            
[   37.437133] TxPerRatePowerLimits_2_4G_Degraded =19,1f,22,23,27,28           
[   37.437133] TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50
[   37.437133] TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,5
[   37.437133] TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00                      
[   37.437133] TxIbiasTable_2_4G = 11,11,15,11,15,0f                           
[   37.437164] RxFemInsertionLoss_2_4G  = 0E  # 14                             
[   37.437164]                                                                 
[   37.437164]                                                                 
[   37.437164] ###################### FEM0 parameters #########################
[   37.437164]                                                                 
[   37.437164] # (for Single bend 2.4G parameters FEM0 (RFMD 3.0) HDK20)       
[   37.437164]                                                                 
[   37.437194] #RxTraceInsertionLoss_2_4G = 0                                  
[   37.437194] #TXTraceLoss_2_4G = 0                                           
[   37.437194] #RxRssiAndProcessCompensation_2_4G  = ec,f6,00,0c,18,f8,fc,00,084
[   37.437194] #TXBiPReferencePDvoltage_2_4G = 0x0164                          
[   37.437194] #TxBiPReferencePower_2_4G  = 0x80                               
[   37.437194] #TxBiPOffsetdB_2_4G = 00                                        
[   37.437194] #TxLY:1:drvMain_SetDefaults,                                    
[   37.577209] LY:2:drvMain_SetDefaults,RoamingScanning_2_4G_enable =0         
[   37.583770] TIWLAN: 1575.816223: pInitParams->RoamingScanning_2_4G_enable 0 
[   37.591125] TIWLAN: 1575.823578: LY:1:scanMngr_SetDefaults !                
[   37.597015] TIWLAN: 1575.829469: LY:::scanMngr_SetDefaults End !            
[   37.603271] LY:2:drvMain_SetDefaults,                                       
[   37.607147] LY:2:drvMain_Sm                                                 
[   37.696166] LY:::drvMain_SmEvent Start... !                                 
[   37.700531] LY:2:drvMain_Sm eStatus=0 End !                                 
[   37.704895] LY:1:drvMain_SmEvent End !                                      
[   37.708770] LY:1:drvMain_Sm                                                 
[   37.711700] Unhandled fault: external abort on non-linefetch (0x1028) at 0xf0
[   37.719665] Internal error: : 1028 [#1]                                     
[   37.723663] last sysfs file: /sys/kernel/uevent_seqnum                      
[   37.729003] Modules linked in: tiwlan_drv                                   
[   37.733184] CPU: 0    Not tainted  (2.6.37 #353)                            
[   37.738098] PC is at sdioDrv_ExecuteCmd+0x80/0xec [tiwlan_drv]              
[   37.744171] LR is at 0x480b4000                                             
[   37.747436] pc : [<bf005b68>]    lr : [<480b4000>]    psr: a0000013         
[   37.747436] sp : dc03fc20  ip : 0000c350  fp : dc03fc54                     
[   37.759399] r10: dc03fc6f  r9 : 00000001  r8 : bf0c6cc0                     
[   37.764831] r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : 00000000      
[   37.771606] r3 : ffffffff  r2 : fa0b4108  r1 : fa0b410c  r0 : fa0b4130      
[   37.778411] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   37.785827] Control: 10c5387d  Table: 9c074019  DAC: 00000015               
[   37.791809]                                                                 
[   37.791809] SP: 0xdc03fba0:                                                 
[   37.796234] fba0  0000000d 00000010 dc03fbe4 dc03fbb8 c024ed40 c02488e4 ffffc
[   37.804779] fbc0  00000000 00000000 dc03fc54 dc03fbd8 c04599ec c003e274 fa0bc
[   37.813323] fbe0  fa0b4108 ffffffff 00000000 00000000 00000000 00000000 bf0c1
[   37.821838] fc00  dc03fc6f dc03fc54 0000c350 dc03fc20 480b4000 bf005b68 a000f
[   37.830383] fc20  dc03fc54 00000000 bf005624 00000000 00000001 00000009 dc034
[   37.838928] fc40  00000200 000000fb dc03fc9c dc03fc58 bf0067a8 bf005af4 00004
[   37.847442] fc60  dc2c0000 00002000 00000034 60000013 c79e2dbf dc0943d8 dc094
[   37.855987] fc80  dc094214 00000001 00000002 dc0c5c00 dc03fcd4 dc03fca0 bf088
[   37.864532]