TI E2E Community
Low Power RF & Wireless Connectivity
Low Power RF PurePath Wireless Audio Forum
CC8520 CC8530 48MHz clock input xVDD reference
For the 48MHz clock input X1 the datasheets say it is a CMOS level. However it does not say which xVDD source the CMOS level is referenced to.
In the cases where DVDD/AVDD and IOVDD are different levels, and XI is an input, which VDD is the CMOS level referred to?
"It is an analog I/O when used as a crystal input. Is it the same when used as a digital external clock input? Or does it refer to IOVDD in that case? In our application IOVDD=1.8V as needed by logic which interfaces to it. AVDD and DVDD can be 2.5V to 3.3V, controlled by an external CPU."
Ed WalkerTexas Instruments ACAT/DCAT Support
The preferred way (injects the least amount of noise) to input a clock is to have a 600-1000 mVpp sine input AC-coupled through an external capacitor to XI. However a full swing CMOS input (between GND and AVDD) connected directly to XI also works, although the signal must come from a strong driver as it has to override the internally generated bias voltage on XI. You can of course also input a square wave signal with less than full swing (but more than 600 mVpp) but then again, it has to be AC-coupled into XI.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.