Hi,all
my application is a microphone system.it has two transmitter which work as PS and a receiver which works as PM.i configured it ,and it works well.but it only has one LED to indicate the current network status. i think it is not nice.could you tell me how can use both extended LED and status LED to indicate the two microphones's status? the user's guide has mentioned it ,but without details.thank all of you!
Hi Andy,
Alternate status is only available for PS when automatic dynamic channel selection is used or for both PM and PS as low battery warning. The PurePath Wireless Configurator help system has more information on this.
A PM can not support separate LED status for each of the connected PSs.
Regards,
Kjetil
--PS. Thank you for clicking Verify Answer if this answered your question!
Andy,
The only way to get a separate LED for each mic is if you run the PM in host controlled operation and controlling the LEDs from the MCU.
Regards
Kristoffer
-- Thank you for clicking Verify Answer if this answered your question!