It was need change the cc2540f256 of keyfob because that damage with voltage supply reference external was higher than it can capacity and i bought new one .It is cc2540f128 because it was only in stock. My cuestion is why flash programer says "the flash can´t erased" and i can´t programer my keyfob, i need indicate to the debbuger the size of flash? , because the led it´s green when i put the battery in the keyfob and the code not smaller than the capacirity of the flash size.
I Think the .hex file you want to program is build for a CC2540f256. Rebuild it for a f128.
Oh yes, you are right , I was wondering if you could tell me where can I rebuild it for F128 in SmartRF@ Flash Programmer?
You can't do that with SmartRF@ Flash programmer. You must rebuild the project using an IDE such as IAR. The exemples provided by TI with the ble-stack and tools (http://www.ti.com/tool/ble-stack) are IAR Workbench projects. You can dowload a 30-day time-limited version here :
Then after having openned a project. in the project option, you have to choose the CC2540f128 as target.
I followed the instructions you gave me and got that error I show below, have you any idea that is going on?
Warning :verification error on page#0, address range 0x00000-0x00800, address 0x0000A,0xFE (on target)!=0xFF(in object file)
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.