Dear TI,
I cannot find the schematics for the TMDSPLCKIT-V3: C2000 Power Line Modem Developer's Kit in Control Suite. Are these schematics available and if so, where?
Sincerely,
Jason Haedt
Jason,These schematics can be found within the PLC software downloads. I'm confident that the G3 download has the most recent hardware shown inside it.See:http://www.ti.com/plcThank you,Brett
Hi,
While I was trying to use SCI-A port on plc modem, I changed the host and diag port in Zero Config Gui from SCI-B to SCI-A. From then on, I've never been able to see system info in zero config gui even though I'm connected to SCI-A. It says "No serial ports found!" and does not recognize the modem. I downloaded prime from codeskin again over and over but to no avail. Without seeing system info you can't change system configs back to SCI-B. Thanks in advance.
Hello,
The PLC team prefers to answer questions through an email list. I suggest sending your questions to plc_support@list.ti.com and someone will get back to you.
Regards
Lori