Forums

Good evening Maha,

I'm don't quite understand the question. Can you sketch in a few details?

First of all you need some JTAG tool to load program into the DSP memory.

Also you possible need some compiler for programming with C, C++, ASM. Code Composer is a good choice. 

maha zoghlami

Good evening,

I have a relevant search the dsp TMS320f2407, I try to program it how and especially how to introduce a board  with language c or c++ and assembler.

Thank you.

Maha,

Please note that the 2407A has been designated NRND: This product is not recommended for new designs. However, the device, tool, or software continues to be in production to support existing customers. TI does not recommend using this part in a new design. TI encourages designers to consider alternative products for new designs.

May I suggest looking at a 2802x device for your new development instead?

www.ti.com/piccolo

-Lori

Thank you for your answer but I already have to buy this dsp 2407 for my memory of master's degree thus it needs I me untangled with

Thank you for your answer, I schedule(program) my dsp with the software DMC pro, for the appliquations ca girls walking(step) but it is necessary to optimize the time(weather) it is for this reason I have to try to compile him(it) with language c with a picture(board), but the probléme that ca walk(work) not with, thus if you have an idea on the structue of the picture(board) to schedule(program) my DSP and thank you

Thank you for your answer, I program my dsp with the software DMC pro, for the applications  step but it is necessary to optimize the time it is for this reason I have to try to compile it with language c with a board, but the probléme that ca walk(work) not with, thus if you have an idea on the structue of the board to program my DSP and thank you

Hi 

As I understand you already have some device based on 2407 and some program for it .

You can not load the program  into the device or you new optimized program works wrong or did not work  at all. Or you can not compile you program?

Hello, I already compile my programs but my first one probléme that I found the instruction of the board, I made the meme work that we compile in it c but it don't work not: I can not read the board. I hope you have this instruction.merci

Hello, I already compile my programs but my first one probléme that I did not find the instruction of the board, I made the meme work that we compile in it c but it don't work : I can not read the board. I hope you have this instruction of board .thank you.