F28M35H52C1_c28.cmd are changed

Hiroyasu Tazawa1

Other Parts Discussed in Thread: CONTROLSUITE, F28M35H52C

Hi, Everyone

I need your help.
I use controlSUITE of C28x on Concerto F28M35H52C.

F28M35H52C1_c28.cmd's BOOT_RSVD and RAMM0 area are changed between v201 and v203,v204,v205.
Do you know why they are changed ?

I use F28M35H52C1_c28.cmd of v201.
Does v201 have any probrem ?

Regards
Hiroyasu

over 9 years ago

0 Gautam Iyer over 9 years ago

Guru 192875 points

Hi Hiroyasu-san,

You can check this doc for revision history: F28M35x-FRM-EX-UG
You can find the same here:
C:\ti\controlSUITE\device_support\f28m35x\v206\doc
Page no.7 onwards

Regards,
Gautam

0 Hiroyasu Tazawa1 over 9 years ago in reply to Gautam Iyer

Guru 12350 points

Hi, Gautam

I watched F28M35x-FRM-EX-UG.
Which sentence are you talking about ?

It is changed between v203 and v204
But I do not see sentence you said in V2.04 of Revision History

Regards
Hiroyasu

0 Gautam Iyer over 9 years ago in reply to Hiroyasu Tazawa1

Guru 192875 points

I hope you're going through the above pdf in the same folder I've mentioned above. It will be having changes from v206 onwards

Regards,
Gautam

0 Hiroyasu Tazawa1 over 9 years ago in reply to Gautam Iyer

Guru 12350 points

Hi, Gautam

I read F28M35x-FRM-EX-UG-206.
I said which Sentence do you talk.

Please copy sentence you said.

Regards
Hiroyasu

C2000™︎ microcontrollers

C2000 microcontrollers forum

F28M35H52C1_c28.cmd are changed